16 Feb 2018 Hints & Tips 218 times
SPA MAINTENANCE PROCEDURES Rate this item
  • 5.00 / 5 5
( 1 vote )

The following procedures are based on a 1,200 litre spa. Please contact us if you require any assistance with measurements to suit your particular spa.

SPA FRESH FILL

  1. Refill spa with fresh water
  2. Turn on pump, filter and heat to desired temperature
  3. Add 10 caps BioGuard Spa Balance Pak 100 or Performance Up (approximately 150gms)
  4. Add 650mls BioGuard Spa Perfect Balance (approximately 2/3rds bottle)
  5. Add 3 caps BioGuard Spa Optimiser Plus or Velvet (approximately 210gms)
  6. Add 1 sachet BioGuard Spa Purity or Symmetry Tablets in floating dispenser and place in spa.

 WEEKLY SPA MAINTENANCE

  1. Add 1 sachet BioGuard Spa Purity OR Spa Lite*
  2. Add ½ cap BioGuard Spa Optimiser Plus OR Velvet (approximately 35gms)
  3. Add 4 caps BioGuard Spa Perfect Balance (approximately 40mls)
  4. Add 6mls of Crystal Clear OR 2mls of Polysheen Plus
  5. Maintain your BioGuard Spa Brominating OR Symmetry Tablets in the floating dispenser

 PERIODIC TREATMENT

  1. Spa should be drained 3-4 times per year depending on usage. We can advise you when this is due.
  2. Use BioGuard Spa Filter Brite OR Renew 3-4 times per year to degrease and sanitise filters.

 

  • Filters and cartridges should be hosed off at least once a fortnight.
  • Monthly testing of your spa water is crucial. Bring your sample into us for free testing.
SPA MAINTENANCE PROCEDURES Rate this item
  • 5.00 / 5 5
( 1 vote )

    No Comments

Your email address will not be published. Required fields are marked *